Table of Contents
Advertisement
Troubleshooting
The following table provides solutions for some common card stock and label problems. Refer to your
printer documentation for more troubleshooting information.
Solutions to Printing Problems
Problem
Print on heavy stock is
blurred or out of focus.
Toner rubs off the page.
Printing shows voids.
Make sure the Paper Type, Paper Weight, and Paper Texture settings are
appropriate for your print material. (Card stock in excess of 203 g/m
may not produce acceptable print results.)
Print 5 sheets of paper, wait approximately 5 seconds, and then print 5 more sheets
of paper to remove any toner that may have accumulated.
Make sure the Paper Type setting is appropriate for your print material.
Use a lighter weight stock. (The material being used exceeds 300 g/m
Print 5 sheets of paper, wait approximately 5 seconds, and then print 5 more sheets
of paper to remove any toner that may have accumulated.
Change the Paper Type to Plain Paper.
Print 5 sheets of paper, wait approximately 5 seconds, and then print 5 more sheets
of paper to remove any toner that may have accumulated.
Lexmark T630, T632, T634
Solution
78
2
[54 lb bond]
2
.)
Advertisement
Table of Contents
