Table of Contents
Advertisement
Optra T: Overview of Card Stock and Label Support
Paper Source
Standard Tray
250-Sheet Drawer
500-Sheet Drawer
4
Multipurpose Feeder
1
Grain short.
2
Printing labels on the Optra T requires a special label fuser cleaner that prevents duplexing.
It is recommended that when you run vinyl labels, you install a special oil fuser cleaner, P/N 99A0725.
When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner.
It is possible to duplex certain labels that have been specifically designed for this application. In order to
duplex labels, you should see the Lexmark "Converter Lists" to see which converters have successfully
developed this type of label, and you must install a special fuser wiper. The wax wiper that is used with
the Optra T is P/N 99A1082.
3
Vinyl labels are not supported by the Optra T616(n).
4
Due to label design characteristics, unacceptable feeding may be experienced from the multipurpose
feeder.
For paper and transparency specifications, refer to the printer User's Guide.
Optra T
The Optra T prints on many labels designed for use with laser
printers.
The following table lists the maximum basis weights
supported by the trays and the multipurpose feeder. More
detailed specifications appear on the following pages.
Card Stock
Index Bristol
Tag
2
199 g/m
203 g/m
2
163 g/m
163 g/m
2
199 g/m
203 g/m
2
163 g/m
163 g/m
Optra T
1
Cover
2
2
216 g/m
2
2
176 g/m
2
2
216 g/m
2
2
176 g/m
108
2
Labels
Paper
Vinyl
2
2
180 g/m
300 g/m
2
2
163 g/m
260 g/m
2
2
180 g/m
300 g/m
2
2
163 g/m
260 g/m
3
Advertisement
Table of Contents
