Table of Contents
Advertisement
Special Media Options
Source
250-Sheet Special Media Tray
250-Sheet Special Media Drawer
250-Sheet Universally Adjustable Tray
250-Sheet Universally Adjustable Drawer
500-Sheet Special Media Tray
500-Sheet Special Media Tray + Drawer
400-Sheet Universally Adjustable Tray
400-Sheet Universally Adjustable Tray + Drawer
250-Sheet Integrated Label Stacking Device, 8.5" x 11"
500-Sheet Integrated Label Stacking Device, 8.5" x 11"
250-Sheet Integrated Label Stacking Device, 8.5" x 14"
* No longer available from Lexmark
Pick Roller Technology
Like the Optra S and Optra T, the Lexmark T52x, Lexmark T62x and Lexmark T63x families of
printers use an auto compensator to pick the media rather than the corner buckler system used by
earlier printer models.
The Lexmark T520, T522 trays have two rollers that touch the media in two places (see "Figure 8" on
page 63). Avoid placing deep perforations in these areas since the media may nest, causing multiple
sheet feeds. Perforations that could cause nesting and tenting should fall outside the 0.31 - 0.79 in.
area on the leading edge of the media. (This is different from the 0.50 in. we recommend leaving at
Lexmark T520, T522
62
Part Number
11K1572
11K1573
11K1574
11K1878
11K1921
11K1922
11K1941
11K1942
43H5694*
43H5695*
43H5696*
Advertisement
Table of Contents
