Lexmark Laser Printers Label Manual page 77

Print Material Specifications
Print Material
Integrated Forms Pressure
Sensitive Area
Paper Base
(Grain Long)
1
See "Grain Direction" on page 77 for specific recommendations.
2
Pressure sensitive area must enter the printer first for grain short paper.
3
Due to label design characteristics, unacceptable feeding may be experienced from the multipurpose
feeder.
Grain Direction
Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long,
running the length of the paper, or grain short, running the width of the paper.
2
For 60 to 135 g/m (16 to 36 lb bond) paper, we recommend grain long stock. For papers heavier
2
than 135 g/m (36 lb bond), grain short is preferred. For the multipurpose feeder, we recommend
2
60 to 135 g/m (16 to 36 lb bond) paper, grain long. If you feed papers heavier than 135 g/m
bond) from the multipurpose feeder, grain short is preferred.
Maintenance Procedures
If the print quality begins to degrade when printing sheets of vinyl labels, we suggest you follow the
three cleaning steps below:
1
Print 5 sheets of paper.
2
Wait approximately 5 seconds.
3
Print 5 more sheets of paper.
To maintain printer feeding reliability, repeat this cleaning process every time you replace the print
cartridge, more often with some media. Failure to follow maintenance procedures could cause
jamming, poor print quality, feeding problems, and fuser problems.
Range or Maximum Weight Supported
250-Sheet and
500-Sheet Trays
2
140 to 175 g/m
2
2
75 to 135 g/m
(20 to 36 lb bond)
Lexmark T630, T632, T634
77
Multipurpose Feeder
Optional 250-Sheet Drawer
2
140 to 175 g/m
2
75 to 135 g/m
(20 to 36 lb bond)
2
3
and
(36 lb