Product Specific Information; Appliance Certification; Glass Specifications (Ceramic); Btu Specifications - Quadra-Fire SAPH-MBK-IPI Owner's Manual

2

Product Specific Information

A. Appliance Certification
MODELS: SAPH-MBK-IPI, SAPH-D-PMH-IPI, SAPH-D-MBK-
IPI, SAPH-D-CSB-IPI
LABORATORY: Underwriters Laboratories, Inc. (UL)
TYPE: Direct Vent Heater
STANDARD: ANSI Z21.88-2014/CSA 2.33-2014
This product is listed to ANSI standards for "Vented Gas
Stove Heaters" and applicable sections of "Gas Burning
Heating Appliances for
Recreational Vehicles", and "Gas Fired Appliances for Use
at High Altitudes".
NOTICE: This installation must conform with local codes. In
the absence of local codes you must comply with the National
Fuel Gas Code, ANSI Z223.1-latest edition in the U.S.A. and
the CAN/CGA B149 Installation Codes in Canada.
NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.
This appliance is tested and approved as either supplemental
room heat or as a decorative appliance. It should not be
factored as primary heat in residential heating calculations.
Installation and service of this appliance should be
performed by qualified personnel. Hearth & Home
Technologies suggests NFI certified or factory trained
professionals, or technicians supervised by an NFI
certified professional (www.nficertified.org).
B. Glass Specifications (Ceramic)
This appliance is equipped with 5 mm ceramic glass.
Replace glass only with 5 mm ceramic glass. Please contact
your dealer for replacement glass.
6 Quadra-Fire • SAPH-MBK-IPI, SAPH-D-PMH-IPI, SAPH-D-MBK-IPI, SAPH-D-CSB-IPI Owner's Manual • 2343-981_R12 • 08/15
Manufactured Homes
C. BTU Specifications
Models
(U.S. or Canada)
SAPH-MBK-IPI
SAPH-D-PMH-IPI
SAPH-D-MBK-IPI (0-2000 FT)
SAPH-D-CSB-IPI
(NG)
SAPH-MBK-IPIL
SAPH-D-PMH-IPIL
SAPH-D-MBK-IPIL
(0-2000 FT)
SAPH-D-CSB-IPIL
(LP)
and
Maximum Minimum Orifice State
Input Input Size AFUE Steady
BTU/h BTU/h (DMS) Efficiency %
25,000 19,500 42 68.6% 70.8%
22,500 16,500 54 69.4% 71.3%
P4 %
76.2%
76.9%