Adjusting Bidirectional Alignment - Lexmark 2480 User Manual

Adjusting bidirectional alignment

Occasionally, you may want to adjust the character
alignment (also called bidirectional alignment) on your
printer. The following steps illustrate how to adjust the
alignment of the print wires.
1 Make sure the default macro is set to disabled.
2 Turn the printer Off.
3 Open the Operator panel cover to access
4 Press and hold Pitch while turning On the
Note: Make sure continuous forms are loaded in
your printer.
For help, see "Entering Setup mode" on
page 90.
layer 2.
printer.
123