Adjusting Character (Bidirectional) Alignment - Lexmark 2500 User Manual

Control panel lights
Power
Ready
Paper Out
Font Lock
All lights on solid
Panel Lock
Power
Ready
Tractor 2
Paper Out
Font Lock
Power
Ready
Paper Out
Panel Lock
Font Lock
Power
Ready
Tractor 2
Paper Out
Panel Lock
Font Lock
Power
Ready
Tractor 2
Paper Out
Panel Lock

Adjusting character (bidirectional) alignment

Occasionally you may want to adjust the character alignment (also called bidirectional alignment) on your printer.
The following steps illustrate how to adjust the alignment of the print wires.
Notes:
•
Make sure continuous forms are loaded in the printer.
•
Make sure the factory default setting for the Uni-Dir Printing menu option is set to Off (bidirectional).
•
Make sure the default macro is set to Disabled. For more information, see "Forms Macro options" on page 51.
1
Turn the printer off.
2
Open the control panel cover to access layer 2.
3
Press and hold Pitch while turning the printer on.
Status
On
Blinking
Blinking
Blinking
On
Blinking
On
Blinking
Blinking
Blinking
Blinking
On
Blinking
Blinking
Blinking
Blinking
On
Blinking
Blinking
Blinking
Blinking
Blinking
On
Blinking
Blinking
Blinking
Blinking
Troubleshooting
65
Action required
1
Turn the printer off.
2
Turn the printer on.
If the control panel light sequence returns, contact
Customer Support.
Note: If you need help locating the nearest service
representative, visit the Lexmark Web site at
www.lexmark.com.