Selecting Or Locking A Font - Lexmark 2480 User Manual

Selecting or locking a font

1 To select a font, repeatedly press Font until you
2 To lock any font so your software application
3 To disable Font Lock, repeatedly press Font
4 To set a Font or to set Font Lock as a default
see the font light On next to the selection you
want.
Layer 1
Power Ready Tractor2 Paper
Start/Stop
Tear Off
Font
Lock
cannot select a different one, continue pressing
Font until the Font Lock light comes On, and
the font you want is selected.
The font is locked until the printer is turned
Off.
until the Font Lock light turns Off and the font
you want is selected.
If the printer is offline, press Start/Stop. When
the ready light comes On, you are ready to
print.
setting in the Setup menu, see "Using Setup
mode to change printer settings" on page 89.
out
LineFeed FormFeed
Load/Unload Tractor
FastDraft
Draft
Gothic
Courier
31