Lexmark 2480 User Manual page 126

Initialize printer to EU defaults
The standard defaults for Europe are:
•
Code page: 858
•
Character Set: 2
•
Form length: 12"
To change the defaults:
1 Make sure paper and the ribbon cartridge are
installed.
2 Turn the printer Off.
3 Open the ribbon access cover.
4 Move the printhead toward the operator panel
side of the printer until it stops.
5 Close the ribbon access cover.
6 Press and hold Tear Off + Tractor while you
turn the printer On.
7 Continue holding these buttons until the carrier
moves.
Note: The operator panel lights blink On and
Off several times.
Once the carrier moves, your settings have been reset
to factory defaults.
122