Network Settings Menu; Reports Print Menu - Lexmark X502N User Manual

Network Settings menu

Menu item
Ethernet
MAC
LINK Status
LINK Setting
Auto
100M Full Duplex
100M Half Duplex
10M Full Duplex
10M Half Duplex
IP Configuration
DHCP Activated
Off
On
IP Address
xxx.xxx.xxx.xxx
Subnet Mask
xxx.xxx.xxx.xxx
Gateway
xxx.xxx.xxx.xxx
IP Source
DHCP
AUTO IP
Manual
Default IP

Reports Print menu

Menu item
Configuration Page
<none>
Activity Report
<none>
Memory List
<none>
Quick Dial List
<none>
Description
Lets you view the current Ethernet information, and change
the LINK settings.
Note: Auto is the factory default LINK setting.
Lets you view or change the current TCP/IP address
information and network settings.
Notes:
•
On is the factory default DHCP setting.
•
270 sec is the factory default TCP Idle Timeout.
•
Default IP is the factory default IP Source.
•
IP Address, Subnet Mask, and Gateway are four-field IP
addresses.
Description
Prints a configuration page with printer information, settings
information, supply information, and network information
Prints a Fax activity report
Prints a memory status report
Prints the Quick Dial list
90