Lexmark X502N User Manual page 85

Lexmark all in one printer - copier printer scanner user manual
Hide thumbs Also See for X502N:
Table of Contents

Advertisement

Menu item
RX Settings
RX Mode
Fax Only
Manual
FAX/TAD
Auto Reduction
Off
On
Ring Count Delay
xx times
F/T Ring Time
xx sec
Tray Settings
Tray Use: Fax
Auto
Tray 1 Only
Tray 2 Only
Delete Document
Memory Job Clear
Clear
Not Clear
All Clear
Clear
Not Clear
Description
Sets the incoming fax transmission settings
Notes:
FAX/TAD is the factory default setting for RX Mode.
4 times is the factory default setting for Ring Count Delay.
15 sec is the factory default setting for F/T Ring Time.
Off is the factory default setting for Auto Reduction.
Use Auto Reduction to enable or disable automatic
reduction of faxes to fit the paper loaded in the paper tray.
Set the Ring Count Delay to the number of rings before a
fax call is answered. Settings for the ring count range from
1–99.
Set the F/T Ring Time to change the length of time (in
seconds) the machine rings before switching to a fax
receive mode. The ring time settings range from 5–99
seconds.
Sets the default tray to use for incoming faxes
Note: Auto is the factory default setting.
Specifies which documents to clear from memory
Notes:
Use Memory Job Clear to select an individual job to clear.
Use All Clear to clear all jobs from memory.
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents