Table of Contents
Advertisement
The sleep function will switch the television to stand-by after a set period of time.
1
Press the sleep button on the remote control
once. 'Sleep 00' will appear on the screen with
some other information. The display will only
stay on the screen for about five seconds.
2
Press the sleep button again within five seconds and the '00' will change to '30'.
This number is the number of minutes the television will stay on for before it switches to stand-by.
3
Each press of the sleep button increases the time the television will stay on by 30 minutes, up to a maxi-
mum of 120 minutes (2 hours).
4
If you press the sleep button when the timer is set for 120 minutes, the display will return to '0'
and the sleep timer will be switched off.
5
After the sleep timer has been set, you can press the recall button to see how much sleep time is left. The
information display goes off after about five seconds.
The sleep timer will be cancelled if you switch the television off or put it on stand-by.
The sleep function
16
SLEEP
SKIP
MOVE
01 BBC1
NICAM STEREO
G20: 27
SLEEP 00
Advertisement
Table of Contents
