Editing Programmes; Move A Channel, Delete A Channel, Skip - Daewoo DTE-29G3ZZR Instruction Manual

Hide thumbs Also See for DTE-29G3ZZR:

Service manual (68 pages)

Table Of Contents

Table of Contents

Press the menu button.

• Remember if you do not press a button within 30 seconds the menu will go off.

• At any time you can press the MENU button repeatedly to return to normal viewing.

Move the highlight onto

'EDIT'

'PR' is the programme number under which you store a broadcast

channel.

'NAME' is either read automatically from the broadcast or created by you.

'CH' is the broadcast channel number

'SKIP' - see below

Move a channel

When the channel is not on the programme number you want it on, you

can move it.

1. Press the PR buttons to green-highlight the channel you want to

move.

The picture for that channel will show beehind the menu.

2. Press the green MOVE button on the remote control, the highlight changes

to red and the green block on the screen is re-labelled

3. Press the PR buttons to move the red highlight onto the programme

number where you want to put the channel.

4. Press the green MOVE button to finish the move.

Delete a channel

1. Press the PR buttons to green-highlight the channel you want to delete. The picture for that channel will show

behind the menu.

2. Press the yellow DELETE button on the remote control. The highlight change momentarily to red and the

program list shifts down to occupy the vacant slot.

Skip

You set the tick mark under 'SKIP' so the programme number is not recalled when you press the PR buttons to

select a channel.

1. Press the PR buttons to green-highlight the programme number where you want to set or remove the tick

mark. The picture for channel will show behind the menu.

2. Press the red SKIP button on the remote control either to set the tick mark or to remove it.