Table of Contents
Advertisement
Menus for controlling and setting up the television
All menu go off the screen within 30 seconds if you don't press any button.
A box on the lower part of the screen reminds you what the buttons do.
1 Press the remote control MENU button to display the main menu. A choice of several sub-menus appears
on the screen.
PR
PR
2 To select one of the sub-menus, press the
PR
or (volume) buttons to move the
green highlight to the one you want, then
press the OK button.
Up
Right
PR
Left
PR
Down
1 Display the sub-menu as described
in steps 1 and 2 in 'Main menu'
then select the function you want
to change using the PR buttons.
PR
Move up
Move Down
PR
There are some variations on the
general method in the install menu.
In the install menu you
NORMAL/OK
press OK to access the
PR
programme editing
menu or store a
channel.
PR
• Select and adjust the level of each function:
'bright', 'contrast', 'colour', 'sharpness'.
• Selected values are automatically alored in
favourite mode.
Which is recalled by pressing the
NORMAL/OK button during
normal viewing. The normal button
also recalls two fixed picture settings.
3 To get back to normal television, just press the
MENU button repeatedly until all the menus have
gone from the screen.
NORMAL/OK
PR
PR
2 Adjust function using
Remote control CURSORS LEFT or RIGHT button.
Decrease
3 Return to the main menu by pressing the MENU
button. Press it again to return to normal viewing.
• Select and adjust the level of each function:
• VOLUME
• BASS
• TREBLE
• BALANCE
and SOUND 'EFFECT
When the speakers on the screen face
out wards the sound effect makes mono sound
like stereo and it makes stereo sound as if the
speakers are further apart.
Bass and treble change the volume of low and
high frequency sounds. Blance shifts the sound
between the left and right speakers.
9
PR
PR
PR
Increase
PR
PR
PR
Advertisement
Table of Contents
