Picture Control; Sleep Function - Daewoo DUB-2850GB, DUB-2842GB Instruction Manual

PICTURE CONTROL

You can select three pictures settings, by using the remote control NORMAL button (A3) :
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the PICTURE menu.
If an NTSC signal is received, then the TINT adjustment will also be available.
01 BBC1
NORMAL I
18:30

SLEEP FUNCTION

The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP
button (A29), you can enter one of the following settings :
OFF 20 min 40 min 60 min
FORMAT SELECTION
AUTO setting :
If picture format signalling data is received, then
the most appropriate ZOOM format will be au-
tomatically selected. In the absence of this data,
the default ZOOM format will be selected (see
page 12, ZOOM AUTO function under FEATURES
MENU).
Otherwise, the preferred mode of the user can
be forced by repeated pressing of the remote
control ZOOM button (A17):
01 BBC1
NORMAL II
18:30
80 min 100 min 120 min
The SLEEP time remaining (before TV turn-off ) can be seen again at any time by one
touch on the remote control SLEEP button.
A second touch (while the status display is active) will modify the SLEEP time remaining.
Television Format 16:9
The following picture formats are
available:
AUTO 4:3
FULL SCREEN
01 BBC1
FAVOURITE
OFF
01 BBC1
STEREO
ZOOM 14:9 ZOOM 16:9
AUTO
18:30
Remaining time (minutes)
before TV set switches off
20
9