Scs Software Programming - Russound XStream X5 Installation Manual

SCS Software Programming

Note: detailed information can be attained in the help menus within SCS
Items to be programmed with SCS software include:
Zone (room name) and Source Names - a list of predefined names for both are available and will be
visible upon keypads and My Russound App. Custom naming is also possible following the
character parameters.
Source Exclusion – enables or disables the set of sources available to each audio zone.
All ON Participation - defines whether or not the zone will respond to All ON commands from X5'
connected on the network.
Power Management of Sources - enabled / disabled per source. If enabled, the 12VDC trigger
will turn on when the X5 is turned on. The Source IR command feature will also be sent as part of
the power management feature. The source will turn off 5 minutes after the last zone is turned off.
This feature uses IR commands and audio signal sensing to power up sources and initiate audio to
confirm source power states.
Sound Controls - Adjust Bass, Treble, Balance, and Loudness initial settings.
Fixed / Variable Line Output - Determines if zone preamp output gain is at a fixed level or
controllable with the zone volume adjustment.
IR Learning - Source IR codes can be learned, saved, and managed.
IR Macros – Source IR codes can be programmed together in a sequence to transmit as many as 30
IR commands from a touch of button.
IR Universal Code Library – Universal commands are stored in the X5 database to simplify
programming.
FIRMWARE UPDATE - If an update is released, it will be available online at www.russound.com.
Firmware updates are available via IP and USB download. You can use SCS to check for updates.
IR Learning
63