Activating Con@Ctivity 2.0; Installing The Con@Ctivity 2.0 Dongle; Activating The Rangehood - Miele DA 3660 Operating Instructions Manual

Activating Con@ctivity 2.0

Installing the Con@ctivity 2.0
dongle
In order for the Con@ctivity 2.0 function
to be used, the cooktop must be fitted
with the Con@ctivity dongle.
 Please read the instructions for the
Con@ctivity 2.0 dongle before
installation.
Activating Con@ctivity 2.0
In order to use the Con@ctivity 2.0
function, radio contact between the
cooktop and the rangehood must be
activated.
Both appliances must be installed and
operational.
Wireless connection must be activated
on the rangehood and the cooktop at
the same time. Activation on the
rangehood is described below.
Activation on the cooktop is described
in the relevant Operating instructions.
Please refer to the Operating
instructions before starting.
Activate the rangehood first, then the
cooktop.
54

Activating the rangehood

Signing on/off is carried out with the
deflector plate retracted.
 Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
 The cooktop and rangehood must be
switched off.
 Press the run-on option control
515 for approx. 10 seconds until
the indicator for the power setting 1
lights up.
 Then press in turn,
– the "" control,
– then the "" control,
– then the lighting control .
If the remote control is already
activated, 2 and 3 will light up
constantly. If there is no wireless
connection, 2 and 3 will flash at the
same time.
 To activate Con@ctivity 2.0, press the
"" button.
The search for a signal will start.
 Meanwhile, start the activation of the
cooktop.