Miele DA 3660 Operating Instructions Manual page 43

 Screw the brackets onto the right and
left inside walls of the housing unit so
that they are flush with the bottom
edges of the unit. The brackets are
designed for 16 and 19 mm thick unit
sides. Affix the bracket that matches
the thickness of the unit side, as
shown.
 Fit the screws for attaching the
rangehood so that they protrude by
about 5 mm, as shown. Only use the
front screws when fitting a 900 mm
wide rangehood in a 600 mm wide
wall unit.
Installation
43