Activating Con@ctivity 2.0
Installing the Con@ctivity 2.0
Stick
In order to use the Con@ctivity 2.0
function, the hob must first be fitted
with the Con@ctivity 2.0 Stick.
Please read the separate installation
instructions supplied with the
Con@ctivity 2.0 Stick.
Activating Con@ctivity 2.0
Wireless connection must be activated
between the hob and the cooker hood
before the Con@ctivity 2.0 function can
be used.
Both appliances must be installed and
operational.
Wireless connection must be activated
on the cooker hood and the hob at the
same time. Activation on the cooker
hood is described below.
Activation on the hob is described in
the relevant Operating and installation
instructions. Please refer to the
Operating instructions before starting.
Activate the cooker hood first, then the
hob.
40
Activating the cooker hood
This is only possible via the cooker
hood control panel, not via the
remote control.
The hob and cooker hood must be
switched off.
Press and hold the run-on control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
Then press in turn:
– the control
– then the control
– then the lighting control
If the remote control has already been
activated, the indicators 2 and 3 will
light up continuously. If a wireless
connection has not yet been
established, indicators 2 and 3 will flash
at the same time.
To activate Con@ctivity 2.0, press the
control.
The search for a wireless connection
will start.
During this period, start activating the
hob.