Resetting the operating hours
counter for the grease filters
After cleaning, the operating hours
counter needs to be reset.
Whilst the fan is switched on, press
the operating hours control for
approx. 3 seconds until only the 1 is
flashing.
The grease filter symbol goes out.
If the grease filters are cleaned before
the operating hours counter has
reached its maximum:
Press the operating hours control
for approx. 6 seconds, until only
the 1 is flashing.
NoSmell active charcoal filters
With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
Replacement charcoal filters can be
obtained from Miele or via the internet
at www.miele-shop.com (depending on
country). See the back of these
instructions for contact details, and
"Technical data" for type and reference
number.
Cleaning and care
Fitting and replacing the charcoal
filters
The slots for the charcoal filters are
located above the grease filters.
Remove the cover. It is held in place
by magnets.
Unwrap the charcoal filters.
Insert the charcoal filters in the slots.
Refit the cover.
When fitting for the first time, activate
the operating hours counter (see
"Operation").
31