HP Photosmart R817 User Manual page 140

Ofrecido por www.electromanuales.com
Problem
My image is
blurry
(continued).
My image is
too bright.
140 HP Photosmart R817/R818 User's Manual
Possible cause
The camera
was set to the
wrong focus
setting.
The subject
moved or you
moved the
camera while
taking the
picture.
The camera
focused on the
wrong thing, or
was unable to
focus.
The flash
provided too
much light.
The Display
Brightness
needs to be
adjusted.
You used EV
Compensation
and should not
have.
Solution
Set the camera to Macro
Super Macro
Infinity focus and try taking
the picture again (see page 42).
• Set the flash to Auto Flash
or Flash On
shooting mode to Action
• Hold the camera with two
hands as you press the Shutter
button or use a tripod. If
appears in the Image Display,
use a tripod.
• Make sure the focus brackets
turn green before taking the
picture (see pages 37 and
40).
• Use Focus Lock (see page 40).
• Use Image Advice (see
page 92).
• Turn the flash off (see
page 47).
• Move back from the subject
and use the zoom to get the
same framing.
Set the Display Brightness to Low
or Medium (see page 114).
Set EV Compensation to 0.0 (see
page 63).
,
, Normal, or
and set the
.