HP Photosmart R817 User Manual page 137

Ofrecido por www.electromanuales.com
Problem
The camera
does not
respond
when I press
a button
(continued).
Possible cause
The camera is
connected to a
computer.
The camera is
processing an
image.
The battery is
drained.
The camera
needs time to
lock focus and
exposure.
The camera
has stopped
operating.
The camera is
using a flash
setting with
Red-eye
Reduction.
Troubleshooting and Support
Solution
Most of the camera buttons do not
respond when the camera is
connected to a computer through
the cradle or dock. If they
respond, it is only to activate or
deactivate the Image Display.
Wait until the Memory light stops
blinking, indicating the camera
has completed processing the
previously taken image.
Replace or recharge the battery.
Use Focus Lock (see page 40).
• Reset the camera (if the AC
adapter is connected to the
camera through the cradle or
dock, disconnect it first). See
page 126.
• Check to see if the memory
card is defective. If so, replace
the memory card.
• Format the internal memory
and/or the memory card (see
page 127).
It takes longer to take a picture
with Red-eye Reduction, as the
shutter is delayed because of the
additional flash. Make sure your
subjects wait for the second flash.
137