Chapter 34 Link Layer Discovery Protocol (LLDP)
Figure 202 Advanced Application > LLDP > LLDP-MED Location
The following table describes the labels in this screen.
Table 143 Advanced Application > LLDP > LLDP-MED Location
LABEL
DESCRIPTION
Port
Enter the port number you want to set up the location within the LLDP-MED network.
Location
The LLDP-MED uses geographical coordinates and Civic Address to set the location
Coordinates
information of the remote device. Geographical based coordinates includes latitude,
longitude, altitude and datum. Civic Address includes Country, State, County, City,
Street and other related information.
Latitude
Enter the latitude information. The value should be from 0º to 90º. The negative value
represents the South.
•
north
•
south
Longitude
Enter the longitude information. The value should be from 0º to 180º. The negative
value represents the West.
•
west
•
east
XS1920 Series User's Guide
288