ZyXEL Communications XS1920 Series User Manual page 226

10 gbe web-managed switches
Hide thumbs Also See for XS1920 Series:
Table of Contents

Advertisement

Figure 157 Advanced Application > IP Source Guard > ARP Inspection > Log Status
The following table describes the labels in this screen.
Table 107 Advanced Application > IP Source Guard > ARP Inspection > Log Status
LABEL
DESCRIPTION
Clearing log status
Click Apply to remove all the log messages that were generated by ARP packets and
table
that have not been sent to the syslog server yet.
Total number of logs
This field displays the number of log messages that were generated by ARP packets
and that have not been sent to the syslog server yet. If one or more log messages are
dropped due to unavailable buffer, there is an entry called overflow with the current
number of dropped log messages.
Index
This field displays a sequential number for each log message.
Port
This field displays the source port of the ARP packet.
VID
This field displays the source VLAN ID of the ARP packet.
Sender MAC
This field displays the source MAC address of the ARP packet.
Sender IP
This field displays the source IP address of the ARP packet.
Num Pkts
This field displays the number of ARP packets that were consolidated into this log
message. The Switch consolidates identical log messages generated by ARP packets
in the log consolidation interval into one log message. You can configure this interval
in the ARP Inspection Configure screen. See
Reason
This field displays the reason the log message was generated.
dhcp deny: An ARP packet was discarded because it violated a dynamic binding with
the same MAC address and VLAN ID.
static deny: An ARP packet was discarded because it violated a static binding with
the same MAC address and VLAN ID.
deny: An ARP packet was discarded because there were no bindings with the same
MAC address and VLAN ID.
dhcp permit: An ARP packet was forwarded because it matched a dynamic binding.
static permit: An ARP packet was forwarded because it matched a static binding.
In the ARP Inspection VLAN Configure screen, you can configure the Switch to
generate log messages when ARP packets are discarded or forwarded based on the
VLAN ID of the ARP packet. See
Time
This field displays when the log message was generated.
Chapter 26 IP Source Guard
Section 26.9.2 on page
XS1920 Series User's Guide
226
Section 26.9 on page
227.
230.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents