Mitel 6800i Series SIP Phones Release 4.0.0 SP1 TR-069 Configuration Guide
PASSIVE AND ACTIVE NOTIFICATION
The phones support active and passive notification. If a parameter is configured to "Active
notification", when this parameter is modified through the Mitel Web UI, an inform message
with the new value of the parameter is sent to the ACS (the phone does not wait for the periodic
inform).
If a parameter is configured to "Passive notification", when this parameter is modified through
the Mitel Web UI, the new value of the parameter is sent to the ACS with the periodic inform.
If there is no notification set, no inform message is sent to inform the ACS when the value of
the parameter is modified.
For any parameter, the notification type (Active, Passive, or None) is set on the ACS server.
Active and Passive notification is currently supported for the following parameters:
•
Global parameters:
•
sip user name
•
sip proxy ip
•
sip proxy port
•
sip registrar ip
•
sip registrar port
•
sip auth name
•
sip password
•
sip stun ip
•
sip stun port
•
dhcp
•
ip
•
Parameters for Line 0 to 9 (where N is the line number):
•
sip lineN user name
•
sip lineN proxy ip
•
sip lineN proxy port
•
sip lineN registrar ip
•
sip lineN registrar port
•
sip lineN auth name
•
sip lineN password
11