Log File Download From Cpe; Firmware Management - Mitel 6863i Configuration Manual

When the phone receives the request to backup, it uploads the local.cfg or server.cfg file to the
server depending on the FileType argument defined (i.e. "1 Vendor Configuration File" =
local.cfg, "X_Aastra Server Configuration File" = server.cfg). The protocol supported for
configuration file upload from the CPE are HTTP, TFTP, and FTP.

LOG FILE DOWNLOAD FROM CPE

The ACS server can make a request for a log file upload. For a log file upload, the server sends
the following parameters:
• URL
• File type
• Username
• Password
When the phone receives this request, it will send the file to the server with the name
"MACADDRESS_TIME_crash.log". The protocol supported for log file upload from CPE are
HTTP, TFTP, and FTP.

FIRMWARE MANAGEMENT

At any point, the ACS can trigger the CPE to upgrade its firmware image. The ACS sends
asynchronous connection requests, triggering the CPE to establish a transaction session to
receive a download method to upgrade its firmware. The ACS is only responsible for sending
the download RPC and retrieving the TransferComplete RPC. The actions taken by the CPE
itself depend on the firmware upgrade mechanism, which is not defined by TR-069.
The Administrator can schedule a firmware upgrade from the ACS by properly configuring the
ACS server. Once the ACS server is configured, the phone will automatically upgrade the
firmware.
The following is the process of how the phone upgrades the firmware:
• The phone receives a download RPC from the ACS.
• If the FileType argument is set to "1Firmware Upgrade Image", a firmware upgrade is started
• The phone checks the version of firmware:
• If the version is identical to the actual version, the phone will abort the firmware upgrade
• If the version is different of the actual version, the phone will upgrade/downgrade the
firmware
• If the firmware upgrade is successful, a reboot is initiated
TR-069 Protocol Support
10