Inform Upon Receipt Of Sip Notify Check-Sync Support - Mitel 6863i Configuration Manual

PARAMETER –
tr69 periodic inform time
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

INFORM UPON RECEIPT OF SIP NOTIFY CHECK-SYNC SUPPORT

Configuration parameters are available allowing Adminstrators the ability to specify the behavior
of the phones when they receive a SIP NOTIFY containing a check-sync event. In such
scenarios, the phones can be configured to behave in one of the following ways:
• Check the configuration files and reboot if changes are detected.
• Redirect the SIP NOTIFY with the check-sync event to the ACS to perform a TR-069
request.
• Redirect the SIP NOTIFY with the check-sync event to the ACS to perform a TR-069 request
and trigger an HTTP GET to a defined Action URI (allowing some settings to be changed
via XML that cannot be changed through TR-069). A Job ID can be specified as well,
allowing the ACS to link the HTTP GET to the initiated TR-069 request.
CONFIGURATION FILES
startup.cfg, mac.cfg
An absolute time reference in UTC to determine when the
CPE will initiate the periodic inform method calls.
String
1970-01-01T00:00:00
The STRING is specified in the following form:
"YYYY-MM-DDThh:mm:ss" where:
• YYYY (year)
• MM (month)
• DD (day)
• T (start of the required time section)
• hh (hour)
• mm (minute)
• ss (second)
tr69 periodic inform time: 0001-01-01T00:00:00
TR-069 Protocol Support
8