Epson EMP-1825 Service Manual page 98

EMP-1825/EMP-1815/EMP-1810
Follow the procedure below to install the AC cable.
C A U T I O N
1). Make sure that the ferrite core is inserted all the way into the slot of the
Lower Case.
2). Route the AC cable as shown below.
Before installing the Intake Fan, attach the Intake Fan Sheet to the fan. Make
sure to align the arc of the sheet with the arc of the fan where the fan cable
comes out.
SEIKO EPSON
Figure 4-66.
Intake Fan Sheet
Figure 4-67.
4-55
CONFIDENTIAL
Revision:C