Rc & Projector's Operation Check - Epson EMP-1825 Service Manual

EMP-1825/EMP-1815/EMP-1810
3.3.10 RC & Projector's Operation Check
For more information, refer to
Assy.)" (p. 20) / 4.4.3 "Removing the Optical Engine and MAB (2) (Optical Engine)" (p. 42)
SEIKO EPSON
Start
1. By pressing [Power] button on Remote Controller,
Is turning the power on/off effective ?
2. Do all the buttons work properly?
3. Is the control effective approx. 6m away from
the front/back of the projector?
NG
1. Select [Remote Receiver]
from the menu, set all the
receivers active.
NG
2. Replace the batteries of
the controller.
NG
3. Replace the controller.
NG
4. Replace Optical Engine
and MAB set.
If the buttons does not work correctly,
apply the remedy from the top (1).
If it doesnot work, go on to the next
remedy.
4.4.1 "Removing the Optical Engine and MAB (1) (MA Board
Flowchart 3-12 RC & Projector's Operation Check
3-20
CONFIDENTIAL
Revision:C