Removing Exterior Parts/Components; Removing The As Lamp Unit - Epson EMP-1825 Service Manual

EMP-1825/EMP-1815/EMP-1810

4.3 Removing Exterior Parts/Components

4.3.1 Removing the AS Lamp Unit

1. Loosen the screw (SCREW,LAMP;3X6) that secures the AS Lamp Lid, and remove the AS
Lamp Lid.
2. Remove the screw (SCREW,LAMP;3X6) from the AS Lamp Lid.
3. Loosen the two screws that secure the AS Lamp Unit and remove the AS Lamp Unit.
AS Lamp Lid
SCREW,
LAMP;3X6
4. (EMP-1825/1815 only)
Push the button on the right of the CF Card Slot, and remove the Dummy CF Card.
5. (EMP-1825/1815 only)
If the Wireless LAN Unit is mounted, remove the screw that secures the Wireless LAN Unit
and remove the Wireless LAN Unit.
Wireless LAN Unit
SEIKO EPSON
Figure 4-3.
Screw
Figure 4-4.
4-10
CONFIDENTIAL
AS Lamp Unit
Dummy CF Card
Revision:C