Making A Copy - Canon iR3245 Easy Operation Manual

Copying Functions

Making a Copy

The following is an explanation of the basic procedure for copying a document. For more detailed procedures, see
the references in each procedure.
Preparations
Regular Copy Basic Features screen
Press [Copy] to switch to the Copy function.
If the following screen is displayed, enter the [Dept.
ID] and [Password]
the touch panel.
Log In/Out
If Department ID Management or the SSO-H login
service is set, it is necessary to enter an ID and
password. (If an optional card reader is attached,
insert a control card.)
For more information, see e-Manual > Basic
Operations.
9
press (Log In/Out) on
Place Your Originals
Placed in the feeder
Placed on the platen glass
Place your originals.
If you have placed your originals on the platen
glass, close the feeder /platen cover after placing
your originals.
If necessary, set copy modes on the Regular Copy
Basic Features screen.
For more information on the copy modes you can
set on the Regular Copy Basic Features screen,
see p. 21 and p. 22.
To set the various copy modes, press [Special
Features].
For more information on the copy modes you can
set on the Special Features screen, see p. 21 and
p. 22.
You can also place paper in the stack bypass
to copy. (For more information, see e-Manual >
Basic Operations.