Making A Copy - Canon ImageRunner 3245 Easy Operation Manual

Copying Functions

Making a Copy

The following is an explanation of the basic procedure for copying a document. For more detailed procedures, see the
references in each procedure.
Preparations
Regular Copy Basic Features screen
Press [Copy] to switch to the Copy function.
If the following screen is displayed, enter the
[Department ID] and [Password]
(Log In/Out) on the touch panel.
If Department ID Management or the SSO-H login
service is set, it is necessary to enter and ID and
password. (If an optional card reader is attached,
insert a control card.)
For more information, see e-Manual > Basic
Operations.
9
press
Place Your Originals
Placed in the feeder
Placed on the platen glass
Place your originals.
If you have placed your originals on the platen glass,
close the feeder/platen cover after placing your
originals.
If necessary, set copy modes on the Regular Copy
Basic Features screen.
For more information on the copy modes you can
set on the Regular Copy Basic Features screen,
see p. 21 and p. 22.
To set the various copy modes, press [Special
Features].
For more information on the copy modes you can
set on the Special Features screen, see p. 21 and
p. 22.
You can also place paper in the stack bypass to
copy. (For more information, see e-Manual > Basic
Operations.)