Toshiba GSC-R60 Service Manual page 32

Step Figure
27
28
29
30
31
32
33
Discription
Remove the screws A326*3 and
A331.
Take off the Flash Plate ASSY
(AC12) and Miceophone Plate
(A152).
Remove the screw A324.
Detach the Flash Plate ASSY
(AC12) and FLASH PCB ASSY
(UA51).
Remove the MAIN PCB ASSY
(U001) as shown.
Remove the screws A331 and
A332. Remove the lens block, the
FPC of MAIN PCB ASSY (U001)
connected is removed.
Lens Module ASSY (HA52), Lens
Holder (A305), Lens Cushions
(A306*4) and LENS-MAIN FPC
ASSY (UA09) detach from Lens
Block.
Remove the Shield Gasket A
(A335) and Shield Gasket B
(A356) from TERMINAL PCB
ASSY (UA11).
Remove the screws A327*2.
31
Remark
This work is unnecessary when
not exchanging the FLASH PCB
ASSY (UA51).
This work is unnecessary when
not exchanging Lens Module
ASSY (HA52), LENS-MAIN FPC
ASSY (UA09) and Lens Cushions
(A306*4).
Since it is easy to separate from a
Lens Cushions (A306). Be careful
not to lose.
This work is unnecessary when
not exchanging the TERMINAL
PCB ASSY (UA11),the Shield
Gasket A (A335) and Shield
Gasket B (A356).