Toshiba GSC-R60 Service Manual page 31

Step Figure
20
21
22
23
24
25
26
Discription
Remove the Speaker Cushion
(A320).
Remove the connector of JACK
PCB ASSY (UA02) and take off
the Speaker ASSY (HA55).
Remove the lead wire of JACK
PCB ASSY (UA02) from the
connector of MAIN PCB ASSY
(U001).
Remove the screws A324*2 and
take off the JACK PCB ASSY
(UA02).
Remove the screws A330 and
A331.
Pushing the Lug with tweezers
and remove the Main Cover ASSY
(AA01).
Remove the FLASH-MAIN FPC
(W999) from the connector of
FLASH PCB ASSY (UA51).
30
Remark
This work is unnecessary when
not exchanging Main Cover ASSY
(AA01), Speaker ASSY (HA55)
and Speaker Cushion (A320).
This work is unnecessary when
not exchanging the Main Cover
ASSY (AA01) and the Speaker
ASSY (HA55).
This work is unnecessary when
not exchanging the JACK PCB
ASSY (UA02).