Quilting Bar For The Zigzag Foot - Janome Memory Craft 6500 Professional Instruction Book

Janome Memory Craft 6500 Instruction Manual
1
4
www.aaasewing.com

Quilting bar for the zigzag foot

Machine Setting
Pattern:
Thread tension:2-6
Presser foot:
Foot pressure: 2
Reduce the foot pressure to "2" for better maneuverability
of bulky material.
To attach
Loosen the screw on the back of the foot holder.
2
Insert the quilting bar into the opening and slide the
3
quilting bar to set the width at the space of the seams you
desire.
Tighten the screw.
To sew
Sew while tracing the previous seam with the quilting bar.
Freemotion quilting
Machine Setting
Pattern:
Thread tension:2-6
Presser foot:
Foot pressure: 1
Feed dog:
Attach the darning/embroidery foot P-2 (refer to page 29
for how to attach it).
Baste or pin the quilt layers. Draw a quilt design on the
top fabric with a washable maker.
Move the quilt layers slowly and evenly while stitching on
the marked design.
CAUTION:
Do not pull the fabric while stitching. This may deflect the
needle causing it to break.
39
Janome Sewing Machine
01 (Mode 1)
Zigzag foot A
1 Screw
2 Opening on the Foot Holder
3 Quilting Bar
4 Space of the Seams
11 (Mode 2)
Darning foot P-2
Dropped
MC6500P Owners Manual/ User Guide