Basting - Janome Memory Craft 6500 Professional Instruction Book

Janome Memory Craft 6500 Instruction Manual
1
www.aaasewing.com

Basting

Machine Setting
Pattern:
Thread tension:1-3
Presser foot:
Foot pressure: 1
Feed dog:
The basting stitch is used to hold fabric layers together
during fitting.
Lower the feed dog
Set the foot pressure dial at "1".
2
Attaching the darning foot P-2
Loosen the thumbscrew and remove the foot holder.
Attach the darning foot P-2 to the presser bar putting the
pin on the needle clamp screw.
3
Tighten the thumbscrew firmly with the screwdriver.
To sew:
Draw the both needle and bobbin thread to the back.
Depress the foot control. The machine will take one stitch
and stop automatically.
Release the foot control.
Hold the fabric taut and slide it to a place where you want
the next stitch.
CAUTION:
Do not pull the fabric while stitching. It may deflect the
needle causing it to break.
29
Janome Sewing Machine
07
Darning foot P-2
Dropped
1 Thumbscrew
2 Pin
3 Needle Clamp Screw
MC6500P Owners Manual/ User Guide