Winding The Bobbin - Janome Memory Craft 6500 Professional Instruction Book

Janome Memory Craft 6500 Instruction Manual
2
2
3
3
4
5
6
7
www.aaasewing.com
1
1
4
5

Winding the bobbin

1 Pass the thread through the guide on the thread
guide post from behind.
1
2 Pass the thread under the bobbin winding
tension disk.
2
3 Thread through the hole in the bobbin from the
inside to the outside.
3
4 Put the bobbin on the bobbin winder spindle.
Push the bobbin winder stopper to the left.
4
5 6 Hold the free end of the thread in your hand and
press the bobbin winding button.
Press the bobbin winding button again to stop
the bobbin when it has made several turns, and
cut the thread close to the hole in the bobbin.
5
7 Press the bobbin winding button again. When
the bobbin is fully wound, the machine will stop
automatically.
Return the bobbin winder stopper to its original
position, and cut the thread.
NOTE:
The Memory Craft 6500 has an exclusive motor for
bobbin winding, which allows you to wind the bobbin
while stitching.
MC6500P Owners Manual/ User Guide
13
Janome Sewing Machine
Thread Guide Post
Bobbin Winding Tension Disk
Bobbin Winder Spindle
Bobbin Winder Stopper
Bobbin Winding Button