Daikin FTK25JVE9 Service Manual page 116

Si04-115
Step
6 Control printed circuit
board.
3. Remove swing motor
assembly.
To remove swing motor
1
assembly, remove two
screws.
(Manual adjusting for
the vertical blades.)
Removal Procedure
Procedure
For FTK25J, FTK35J, FTX25J, FTX35J
Points
"
The control printed circuit
board is integrated with the
power supply printed circuit
board.
"
Provide a supporter so that
the joint link will not drop off,
in case the horizontal blade
assembly is removed.
107