Specifications / Before Assembly - Bowflex TreadClimber TC20 Assembly & Owners Manual

Specifications / Before Assembly

Maximum User Weight: 136 kgs ( 300 lbs )
Power Requirements:
Operational Voltage: 220V - 240V AC, 50Hz
Operating Current: 5A max
Complies with the following:
ISO 20957 Compliant
DO NOT dispose of this product as refuse. This product is
to be recycled. For proper disposal of this product, please
follow the prescribed methods at an approved waste
center.
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a
minimum workout area of 202 cm x 401 cm ( 79.5" x 158" ).
Basic Assembly Tips
Follow these basic points when you assemble your
machine:
• Read and understand the "Important Safety
Instructions" before assembly.
• Collect all the pieces necessary for each
assembly step.
• Using the recommended wrenches, turn the
bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly lift and look
through the bolt holes to help insert the bolt
through the holes.
• The assembly requires 2 people.
• Do not use any power tools for assembly.
Note: The TreadClimber
Machine Mat
The Bowflex™ TreadClimber™ Machine Mat is an optional accessory that helps keep your workout area clear and adds a layer of protection to
your floor. The rubber machine mat provides a non-slip, rubber surface which limits static discharge and reduces the possibility of display or running
errors. If possible, put your Bowflex™ TreadClimber™ Machine Mat in your selected workout area before you begin assembly.
To order the optional machine mat, go to: www.nautilusinternational.com.
SAA Compliant
2.02m
( 79.5" )
fitness machine is designed to plug into a grounded outlet only.
®
Assembly / Owner's Manual
139.7 cm ( 55" )
4.01m ( 158" )
0.6m
( 24" )
0.6m
( 24" )
6
140.3 cm
( 55.2" )
80 cm ( 31.5" )
2m
( 79" )