Moving Your Machine; Leveling Your Machine - Bowflex TreadClimber TC20 Assembly & Owners Manual

Moving Your Machine

The TreadClimber fitness machine weighs approximately 91 kg ( 200 lbs ) when fully assembled and requires caution when being moved. Use the
®
Transport Handle found under the front of the machine to move it. To get access to the Transport Handle, turn the Levelers until you have sufficient
clearance between the machine and floor.
Your machine can be rolled on the transport wheels to a new location. Lower your machine
slowly into its new location without injury to your head or fingers.
Do not use the uprights, handlebars, or the Console to lift or move the machine. Injury
to you or damage to the machine can occur.
The machine may be moved by one or more persons depending on their physical
abilities and capacities. Make sure that you and others are all physically fit and able to
move the machine safely.
Place the machine on a clean, hard, level surface, free from unwanted material or
other objects that may hamper your ability to move freely. A rubber mat should be
used below the machine to prevent the release of static electricity and protect your
flooring.
For safe storage of the machine and to prevent unsupervised operation of the
machine always remove the Safety Key and disconnect the power cord from the wall
outlet and the AC input. Place the power cord in a secure location.

Leveling Your Machine

Levelers are found on the front of the TreadClimber
adjust:
1. Loosen the upper locking nut.
2. Turn the leveler to adjust the height.
3. Tighten the upper locking nut to lock the leveler.
Do not adjust the levelers to such a height that they detach or
unscrew from the machine. Injury to you or damage to the
machine can occur.
Adjustments
machine. Make sure the TreadClimber
®
13 mm
23
Assembly / Owner's Manual
Adjustments
machine is level and stable before you exercise. To
®