Specifications / Before Assembly - Bowflex Treadmill 10 Assembly & Owners Manual

Specifications / Before Assembly

Power Requirements:
120V
Operational Voltage:
Operating Current:
Heart Rate Armband: 1 Lithium Polymer battery (not replaceable)
Maximum User Weight:
Total Surface Area (footprint) of equipment:
Maximum Inclined Deck Height:
Machine Weight:
Sound Emission: Less than 70 db average without load. Noise emission under load is higher
than without load.
This product complies with the European Radio Equipment Directive 2014/53/
EU
DO NOT dispose of this product as refuse. This product is to be recycled. For proper
disposal of this product, please follow the prescribed methods at an approved waste
center.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the
location must be on a hard, level surface. Allow a minimum workout area of 223 cm x 416 cm
(87.6" x 164"). Be sure that the workout space you are utilizing has adequate height clearance,
taking into consideration the height of the user and the maximum incline of the machine.
Basic Assembly
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety
Instructions" before assembly.
• Collect all the pieces necessary for each assembly
step.
• Using the recommended wrenches, turn the bolts
and nuts to the right (clockwise) to tighten, and the
left (counterclockwise) to loosen, unless instructed
otherwise.
• When attaching 2 pieces, lightly lift and look
through the bolt holes to help insert the bolt
through the holes.
• The assembly requires 2 people.
• Do not use any power tools for assembly.
Machine Mat
The Bowfl ex™ Machine Mat is an optional accessory that helps keep your workout area clear and adds a layer of protection to your fl oor. The rubber
machine mat provides a non-slip, rubber surface which limits static discharge and reduces the possibility of display errors. If possible, put your
Bowfl ex™ Machine Mat in your selected workout area before you begin assembly.
To order the optional machine mat, contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside US/
Canada).
220V
110-127V AC, 60Hz 220V - 240V AC, 50Hz
15 A 8 A
181 kg (400 lbs)
21688 cm
46.2 cm (18.2 inches)
approx. 146.5 kg (323 lbs)
2.23 m
( 87.6" )
Assembly / Owner's Manual
165.9 cm
2
0.6 m
( 24" )
0.6 m
( 24" )
8
(65.3")
215.8 cm
(85")
177.7 cm
(70")
112.9 cm
(44.5")
4.2 m ( 164" )
2 m
( 79" )
100.5 cm
(39.6")