EAS00799
3. The turn signal light, turn signal indicator
light or both fail to blink.
1. Turn signal light and turn signal indicator
light bulbs and sockets
8 Check the turn signal light bulb and
socket for continuity.
Refer to "CHECKING THE BULBS AND
BULB SOCKETS"
8 Check the turn signal indicator light bulb
and socket for continuity.
Refer to "CHECKING THE BULBS AND
BULB SOCKETS"
8 Are the turn signal light bulb and socket
OK?
YES
2. Turn signal switch
8 Check the turn signal switch for conti-
nuity.
Refer to "CHECKING THE SWITCHES".
8 Is the turn signal switch OK?
YES
NO
Replace the turn
signal light and/or
turn signal indicator
light bulb, socket or
both.
NO
Replace the left
handlebar switch.
SIGNALING SYSTEM
3. Voltage
8 Connect the pocket tester (DC 20 V) to
the turn signal relay coupler (wire har-
ness side) as shown.
Positive tester probe
Negative tester probe
8 Set the main switch to "ON".
8 Measure the voltage (DC 12 V) on brown
1 at the turn signal relay coupler (wire
harness side).
8 Is the voltage within specification?
YES
8-36
-
ELEC
brown 1 1 1 1 1
ground
B
Br/W
1
Br
NO
The wiring circuit from
the main switch to the
turn signal relay coupler
is faultyand must be re-
paired.
Refer to "CIRCUIT DIA-
GRAM".
+