Chapter 1 Workflow; When The Multipath Driver Is Not Used - Fujitsu ETERNUS2000 Connection Manual

Chapter 1
Which documents need to be referred to varies with the connection environment. Refer to the
workflow that follows to determine which documents are required.
Required Documents
• ETERNUS2000 Disk storage systems Server Connection Guide (SAS) for Linux
(This manual)
• Server Support Matrix
• ETERNUS2000 Disk storage systems Server Connection Guide (SAS) ETERNUS Disk
Storage System Settings
• ETERNUSmgr Install Guide
• ETERNUSmgr User Guide
• Other manuals provided with each product (server, SAS Cards, and Multipath Driver)
1.1

When the Multipath Driver is not Used

The documents and workflow required when a multipath driver is not used are as follows.
Workflow
P3AM-4212-02ENZ0 ETERNUS2000 Disk storage systems Server Connection Guide (SAS) for Linux
Workflow
Install ETERNUSmgr and Set Up the ETERNUS Disk Storage System
If ETERNUSmgr is to be used, install it and set up the ETERNUS Disk storage system.
Refer
-
"Chapter 2 Checking the Server Environment" (page 13)
-
"Chapter 4 Installing and Setting Up ETERNUSmgr" (page 15)
-
"Chapter 5 Setting Up the ETERNUS Disk Storage Systems" (page 16)
-
Installing ETERNUSmgr
•
"ETERNUSmgr Install Guide"
-
Checking the setup and maintenance operations
•
"ETERNUSmgr User Guide"
-
Setting up the ETERNUS Disk storage system
•
"ETERNUS2000 Disk storage systems Server Connection Guide (SAS) ETERNUS
Disk Storage System Settings"
9
Copyright 2010 FUJITSU LIMITED