When The Multipath Driver Is Used - Fujitsu ETERNUS2000 Connection Manual

Chapter 1 Workflow
>

1.2 When the Multipath Driver is Used

1.2 When the Multipath Driver is Used
The documents and workflow required when a multipath driver is used are as follows.
Workflow
P3AM-4212-02ENZ0 ETERNUS2000 Disk storage systems Server Connection Guide (SAS) for Linux
Set Up the ETERNUS Disk Storage System
Set the various parameters required to operate the ETERNUS Disk storage system.
Refer
-
"Chapter 2 Checking the Server Environment" (page 13)
-
"Chapter 5 Setting Up the ETERNUS Disk Storage Systems" (page 16)
-
Installing ETERNUSmgr
•
"ETERNUSmgr Install Guide"
-
Checking the setup and maintenance operations
•
"ETERNUSmgr User Guide"
-
Setting up the ETERNUS Disk storage system
•
"ETERNUS2000 Disk storage systems Server Connection Guide (SAS) ETERNUS
Disk Storage System Settings"
Install the SAS Card Driver
Install the appropriate driver for the SAS card being used.
Refer
-
Checking the SAS Card driver versions
•
"Chapter 6 Installing the SAS Card Drivers" (page 17)
•
"Server Support Matrix"
Set Up the Linux Server
Set up the required parameters for the connection to the ETENRUS Disk storage system.
Refer
-
"7.1 For Fujitsu SAS Cards" (page 18)
-
"7.2 For LSI Logic SAS Cards" (page 18)
11
Copyright 2010 FUJITSU LIMITED