Fujitsu Q802 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Network Storage Server
  5. Q802
  6. Operating manual

Fujitsu Q802 Operating Manual

Celvin nas server
Hide thumbs
Table of Contents

Advertisement

Quick Links

Operating Manual
System
CELVIN® NAS Server

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu Q802

Summary of Contents for Fujitsu Q802

  • Page 1 Operating Manual System CELVIN® NAS Server...
  • Page 2 For driver updates, please go to: http://support.ts.fujitsu.com/download Should you have any technical questions, please contact: ● our Hotline/Service Desk (see Service Desk list or visit: http://support.ts.fujitsu.com/contact/servicedesk) ● your sales partner ● your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany http://www.fujitsu.com/fts/ Copyright © Fujitsu Technology Solutions GmbH 2014. All rights reserved. Publication Date 08/2014 Order No.: A26341-F103-Z306-1-7619, edition 3...
  • Page 5 CELVIN® NAS Server Operating Manual Your CELVIN® NAS Server … Installing the NAS Connecting to the NAS Copying data using the front USB port Web Server FTP server Using the QGet download software NetBak Replicator Firmware update NAS maintenance Troubleshooting RAID operation errors Technical data...
  • Page 6 Trademarks Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries. Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation in the United States and/or other countries.

  • Page 7: Table Of Contents

    NetBak Replicator..........................45 Installing NetBak Replicator ....................... 45 Using NetBak Replicator ........................46 Firmware update..........................47 Updating the system firmware using Fujitsu Finder..............48 NAS maintenance ..........................50 Shutting down/rebooting the server....................50 Resetting the administrator password and network settings .............. 52 Failure or malfunction of a hard disk ....................
  • Page 8 Contents GNU GENERAL PUBLIC LICENSE....................61 Fujitsu...

  • Page 9: Your Celvin Nas Server

    CE marking CE marking for devices without wireless component supplied at launch from 20.07.2007 The shipped version of this device complies with the requirements of EC directive 2004/108/EC "Electromagnetic Compatibility", 2006/95/EC "Low voltage directive" and 2009/125/EC “Ecodesign Directive“. Fujitsu...
  • Page 10 Q802 (model with 4 hard disks) or Q902 (model with 6 hard disks). Back up your system regularly to avoid any potential data loss. Fujitsu Technology Solutions will not accept responsibility for the loss of or the recovery of any data in any form.

  • Page 11: Hardware Overview

    Your CELVIN® NAS Server … Hardware overview ® CELVIN NAS Server Q802 Front ENTER SELECT STATUS eSATA POWER COPY LED indicators: Status, LAN, USB, eSATA LED indicators: HDD 1-4 ON/OFF switch One Touch Copy button USB 2.0 Enter button Select button...
  • Page 12 Your CELVIN® NAS Server … Rear Power supply HDMI (reserved) VGA (reserved for service purposes) Reset button for password and network settings USB 3.0 x 2 USB 2.0 x 4 Gigabit LAN x 2 eSATA x 2 Security Lock slot Fujitsu...

  • Page 13: Celvin Nas Server Q902

    Your CELVIN® NAS Server … ® CELVIN NAS Server Q902 Front ENTER SELECT STATUS eSATA POWER COPY LED indicators: Status, LAN, USB, eSATA LED indicator: Power supply ON/OFF switch One Touch Copy button USB 2.0 Enter button Select button LED indicators: HDD 1-6 Fujitsu...
  • Page 14 Your CELVIN® NAS Server … Rear Power supply HDMI (reserved) VGA (reserved for service purposes) Reset button for password and network settings USB 3.0 x 2 USB 2.0 x 4 Gigabit LAN x 2 eSATA x 2 Security Lock slot Fujitsu...

  • Page 15: Installing The Nas

    This product will work with 2,5/3,5 inch SATA hard disks from major hard disk manufacturers. A list of compatible drives can be found at http://support.ts.fujitsu.com. Fujitsu Technology Solutions will accept no liability whatsoever for any product defects/faulty operation, and/or any time and costs associated with data loss/data recovery, insofar as the cause can be attributed to misuse or improper installation of hard disks, regardless of the circumstances or for whatever reason.

  • Page 16: System Status Checks

    2 3 4 5 ENTER SELECT STATUS eSATA 1 = Power supply (Q902) 4 = USB 2 = System status 5 = eSATA 3 = LAN 6 = HDD 1 - 4 (Q802) HDD 1 - 6 (Q902) Fujitsu...
  • Page 17 The NAS is being accessed from the network. The disk data is being accessed and a read/write Flashes red error occurs during the process. A hard drive read/write error occurs. Green The disk data is being accessed. Flashes green The hard drive can be accessed. Green Fujitsu...
  • Page 18 An attempt is being made to copy NAS data to an external storage device connected to the front USB port, but the data cannot be copied. Short beep (0.5 sec) 3, every 5 min. The system fan is out of function. Long beep (1.5 sec) Fujitsu...

  • Page 19: Use The Lcd Panel

    Press the Enter button to confirm. For example, when you switch on the NAS with 5 hard disks installed, the following message is displayed on the LCD panel: C o n f i g . D i s k s ? Fujitsu...
  • Page 20 NAS with an administrator account and change the settings in Disk Management – Encrypted File System. E n c r y p t V O L U M E ? The data encryption functions may not be available in accordance to the legislative restrictions of some countries. Fujitsu...

  • Page 21: View System Information By The Lcd Panel

    – Network Settings – Static IP – Network Settings – BACK Back to Main Menu In System Administration - Network - TCP/IP, you can configure the IP address, subnet mask, gateway, and DNS of LAN 1 and LAN 2. Fujitsu...
  • Page 22 This menu item shows the system temperature and the rotation speed of the system fan. C P U T e m p : S y s T e m p : S y s F a n : 8 6 5 R P M Fujitsu...
  • Page 23 When the cursor moves to OK, press the Enter button. ► Verify the password to confirm the changes. N e w P a s s w o r d : Back Select this option to return to the main menu. Fujitsu...

  • Page 24: System Messages

    HDD Failure The disk volume is full. Vol1 Full A hard drive is ejected. HDD Ejected The disk volume is in degraded mode. Vol1 Degraded The disk volume is unmounted. Vol1 Unmounted The disk volume is inactive. Vol1 Nonactivate Fujitsu...

  • Page 25: Configuring Software Settings

    Installing the NAS Configuring software settings ► Run the product CD. This will open a model selection menu. ► Select the appropriate NAS model to continue. Fujitsu...
  • Page 26 Installing the NAS ► Select Install Fujitsu Finder. ► Follow the on-screen instructions to install Fujitsu Finder. Fujitsu Finder will then run automatically. Fujitsu...
  • Page 27 The following window will be displayed if Windows XP SP2 / SP3 is being used: ► Please select Unblock. If you are using Windows 7, the following window will be displayed: ► Set a checkmark against Private networks, such as my home or work network. ► Click on Allow access. Fujitsu...
  • Page 28 Installing the NAS Fujitsu Finder detects the NAS in the network and asks whether Quick Setup should be run. ► Click on Yes to continue. If the NAS could not be found, please click on Refresh to retry. Check that you have installed a hard disk in the NAS.
  • Page 29 To create a RAID 1 array, a minimum of 2 hard drives are required. The storage capacity of a RAID 1 disk volume is equal to the size of the smallest hard drive. Fujitsu...
  • Page 30 N/2. N is the number of hard drives in the volume. RAID 10 tolerates failure of only two disks from two different sets of disks. ► Select the desired File System. ► Click on Next and then on Start Installation. Fujitsu...

  • Page 31: Connecting A Network Drive

    Installing the NAS Connecting a network drive ► Start the Fujitsu Finder. ► Open the menu Tools - Map Network Drive. Fujitsu...
  • Page 32 Select the network share that should be mapped as a network drive and click on Map network drive. Download, multimedia, usb und web are standard network shares for using Download Station, Multimedia Station, external USB storage devices (automatic copy function), or Web Server. Recordings is the standard network share for using the Surveillance Station. Fujitsu...
  • Page 33 Installing the NAS ► Enter the default user name and password. – Default user name: admin – Default Password: admin Fujitsu...
  • Page 34 Installing the NAS ► Select the drive letter to be used for the connection and click on Finish. Fujitsu...
  • Page 35 Installing the NAS ► Once a connection has been successfully established, the network share will become available for use as a local data carrier in Windows Explorer. Fujitsu...

  • Page 36: Connecting To The Nas

    Enter \\[NAS name] or \\[NAS IP] to access the shared folders on the NAS. The placeholders [NAS name] and [NAS IP] represent the name or IP address of your NAS. You can use the Fujitsu Finder to obtain this information. Fujitsu...
  • Page 37 Connecting to the NAS ► Please enter your user name and password. – Default user name: admin – Default password: admin Files can be uploaded to the network shares. Fujitsu...

  • Page 38: Administering The Nas Via A Web Browser Under Windows

    The default NAS IP is 169.254.100.100:8080. If the NAS has been configured to use DHCP, then the Fujitsu Finder can be used to check the IP address of the NAS. Make sure that the NAS is connected to the same subnet as the computer that is running Fujitsu Finder.

  • Page 39: Administration User Interface

    11 = Search 4 = Show desktop 12 = Help 5 = Taskbar 13 = Language 6 = Background tasks 14 = Display 7 = External devices 15 = Next desktop 8 = Messages and warnings 16 = Control centre Fujitsu...

  • Page 40: Opening The Main Menu

    The main menu will appear. The main menu consists of three parts: Applications The sub-items enable access to NAS extensions that are provided and maintained by QNAP Systems, Inc. System settings The sub-items enable access to the NAS main function settings. Fujitsu...

  • Page 41: Control Panel / Opening Applications

    QNAP Systems, Inc. These applications can be installed via the App Center. Please understand that Fujitsu cannot be held liable for the content, functionality and security of these applications in any way. In the event of problems with these applications, please contact the relevant developer directly.

  • Page 42: Accessing The Nas From Linux

    "public" should be created in the /mnt/pub directory, use the following command: mount -t nfs 169.254.100.100 :/public /mnt/pub The above command can only be executed when logged in as "root". ► Log in with the user name specified previously. The network share folder can be accessed via the mounted directory. Fujitsu...

  • Page 43: Copying Data Using The Front Usb Port

    Connect the USB drive, e.g. digital camera or flash drive, to the front USB port on the NAS. ► Press the Copy button. Data will be copied to the NAS according to the previously defined settings. Q802 ENTER SELECT STATUS...
  • Page 44 YYYYMMDD-2 for partition 2, etc. If the source storage device only contains one partition, the backup folder is simply named YYYYMMDD. Files are copied from the source to the target. Additional files on the target are deleted; files with the same name are overwritten by the source. The source data remains unchanged. Fujitsu...

  • Page 45: Web Server

    Click the http://[NAS IP]/ link on the Web Server page to access the web pages that were uploaded. Note that when Web Server is enabled, it is necessary to type http://[NAS IP:8080] into the web browser to access the login page for the NAS. Fujitsu...

  • Page 46: Mysql Administration

    Please follow the steps below or refer to the INSTALL file in the SQLiteManager-*.tar.gz download to install SQLiteManager. ► Extract the SQLiteManager-*.tar.gz download file. ► Upload the extracted SQLiteManager-* folder to \\[NAS IP]\Web\. ► Open a web browser and go to http://[NAS IP]/SQLiteManager-*/. The "*" symbol refers to the version number of SQLiteManager. Fujitsu...

  • Page 47: Ftp Server

    The NAS supports the FTP service. To use the FTP service, enable this function in Network Services and follow the steps below: ► Open Internet Explorer and enter ftp://[NAS IP] or ftp://[NAS Name]. It is essential that secure passwords are used when using the FTP server. A secure password contains numbers, letters and special characters. Fujitsu...

  • Page 48: Using The Qget Download Software

    Download Stations on multiple servers separately to modify the settings one after the other. Simply install QGet on any Windows computer to manage the download tasks for all NAS servers in one place. ► To use QGet, install the software from the product CD-ROM. ► Follow the instructions to install QGet. Fujitsu...
  • Page 49 Using the QGet download software ► Run QGet from the installed location. Fujitsu...
  • Page 50 Using the QGet download software For details on using QGet, please refer to the online help included with the software. Fujitsu...

  • Page 51: Netbak Replicator

    Select Install NetBak Replicator from the menu on the NAS CD. ► Follow the on screen instructions to install the application. ► A shortcut icon will appear on the desktop upon successful completion of the installation process. Double click on this icon to launch NetBak Replicator. Fujitsu...

  • Page 52: Using Netbak Replicator

    ► Launch NetBak Replicator. ► For details on how to use the software, press F1 . Fujitsu...

  • Page 53: Firmware Update

    Before updating the system firmware, make sure the product model and firmware version are correct. Follow the steps below to update the firmware: ► Please visit http://www.fujitsu.com/fts/support and read the release notes for the new firmware version to check if it is necessary to update the firmware. ►...

  • Page 54: Updating The System Firmware Using Fujitsu Finder

    Firmware update Updating the system firmware using Fujitsu Finder The system firmware can be updated using Fujitsu Finder. Choose the NAS model and select Update Firmware from the Tools menu. Fujitsu...
  • Page 55 Browse to select the correct firmware for the NAS. Click Start to update the system. The Fujitsu Finder can be used to update all servers of the same model on the same local network. Please note that this process requires administrator access to all the servers to be updated.

  • Page 56: Nas Maintenance

    Forcing a shutdown may damage the file system and lead to data loss. ► To force a shutdown of the server, press and hold down the ON/OFF button for at least 10 seconds. The server will beep once and then shut down immediately. Fujitsu...
  • Page 57 NAS maintenance The Fujitsu Finder can be used to restart or shut down the server (admin access required). Fujitsu...

  • Page 58: Resetting The Administrator Password And Network Settings

    Default user name: admin – Password: admin The Enable configuration reset switch option must be enabled in Control Panel - System Settings - Hardware in order to allow the system to be reset to defaults using the reset button. Fujitsu...

  • Page 59: Failure Or Malfunction Of A Hard Disk

    If the system restarts continuously, it may fail to resume normal operation. Please contact technical support immediately in such cases. System temperature protection When the system temperature exceeds 70 °C (158 °F), the system will shut down automatically to protect the hardware. Fujitsu...

  • Page 60: Eup Mode Configuration (For Compliance With Legal Standby Requirements)

    If EuP mode is deactivated, the power consumption of the server is greater than 0.5W when switched off. EuP is disabled by default so that you can use the functions Wake on LAN, AC power resumption, and power schedule settings properly. Fujitsu...

  • Page 61: Troubleshooting Raid Operation Errors

    Install a new drive in the NAS to replace the faulty drive. Finally, run the RAID 1 migration. When connecting or removing a hard disk, please adhere strictly to the following rules to avoid causing a system operation fault or loss of data. Fujitsu...

  • Page 62: Hot-Swap Hard Drives

    The next hard disk can then be connected/disconnected. Hot-swap Hard Drives Fujitsu Technology Solutions disclaims any responsibility for product damage/malfunction or data loss/recovery due to misuse or improper installation of hard disks in any occasions for any reasons.

  • Page 63: Raid Recovery

    After recovering a RAID 1, RAID 5, or RAID 6 disk volume from not active to degraded mode by the RAID recovery, users can read or write the volume normally. The volume status will be recovered to normal after synchronization. If the disconnected drive member is damaged, the RAID recovery function will not work. Fujitsu...
  • Page 64 N-2 failed hard drive and any of N-3 and any of the remaining the remaining hard drives hard drives cannot be spun up cannot be spun up or identified or identified or accessed. or accessed. N = Number of hard disk drives in the array Fujitsu...

  • Page 65: Technical Data

    Technical data Technical data Q802 Q902 Intel® Atom™ D27xx 1 GB DDRIII 2 GB DDRIII Flash memory 1 GB (USB DOM) up to 4 x SATA 6G hard disks up to 6 x SATA 6G hard disks Hard disk (hot-swappable and lockable)
  • Page 66 Technical data Q802 Q902 Accessory Accessory Box Power cable CD-ROM 2 x 1.8 m Ethernet cable Quick Installation guide Service Desk brochure Safety instructions Screws for 2.5"hard disk Screws for 3.5"hard disk 2x Hard disk key Fujitsu...

  • Page 67: Gnu General Public License

    To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. Fujitsu...
  • Page 68 Fujitsu...
  • Page 69 The work must carry prominent notices stating that you modified it, and giving a relevant date. • b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”. Fujitsu...
  • Page 70 Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. Fujitsu...
  • Page 71 Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or • b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or Fujitsu...
  • Page 72 Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. Fujitsu...
  • Page 73 (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that Fujitsu...
  • Page 74 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. Fujitsu...
  • Page 75 Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS Fujitsu...

This manual is also suitable for:

Q902Celvin nas

Table of Contents