Fujitsu ETERNUS2000 Connection Manual page 3

This document briefly explains the operations that need to be performed by the user in order to
connect an ETERNUS2000 model 100 or 200 Disk storage system to a server running Linux via
a SAS interface.
This document should be used in conjunction with any other applicable user manuals, such as
those for the ETERNUS2000 model 100 or 200 Disk storage system, server, OS used, SAS
cards, drivers, etc.
Note that this manual refers the following documents.
• Server Support Matrix
• ETERNUS2000 Disk storage systems Server Connection Guide (SAS) ETERNUS Disk
Storage System Settings
• ETERNUSmgr Install Guide
• ETERNUSmgr User Guide
Also, note that in this document the ETERNUS2000 models 100 and 200 Disk storage systems
are collectively referred to as ETERNUS Disk storage systems.
The Contents and Structure of this Manual
This document is composed of the following 11 chapters.
• Chapter 1 Workflow
This describes how to connect the ETERNUS Disk storage systems to a server running Linux
• Chapter 2 Checking the Server Environment
This describes which servers can be connected to ETERNUS Disk storage systems.
• Chapter 3 Notes
This describes issues that should be noted when connecting the ETERNUS Disk storage
systems and server.
• Chapter 4 Installing and Setting Up ETERNUSmgr
This describes how to install ETERNUSmgr.
• Chapter 5 Setting Up the ETERNUS Disk Storage Systems
This describes how to set up the ETERNUS Disk storage systems using ETERNUSmgr.
P3AM-4212-02ENZ0 ETERNUS2000 Disk storage systems Server Connection Guide (SAS) for Linux
3
Preface
Second Edition
December 2010
Copyright 2010 FUJITSU LIMITED