Fujitsu ETERNUS2000 Connection Manual page 10

Chapter 1 Workflow
> 1.1 When the Multipath Driver is not Used
P3AM-4212-02ENZ0 ETERNUS2000 Disk storage systems Server Connection Guide (SAS) for Linux
Install the SAS Card Driver
Install the appropriate driver for the SAS card being used.
Refer
-
Checking the SAS Card driver versions
•
"Chapter 6 Installing the SAS Card Drivers" (page 17)
•
"Server Support Matrix"
Set Up the Linux Server
Set the parameters required for connection to the ETERNUS Disk storage system.
Refer
-
"7.1 For Fujitsu SAS Cards" (page 18)
-
"7.2 For LSI Logic SAS Cards" (page 18)
Set the Server to Recognize the Logical Units
Set up the server so that it can recognize the ETERNUS Disk storage systems' LUN
(logical units).
Refer
-
"Chapter 8 LUN Recognition" (page 19)
10
Copyright 2010 FUJITSU LIMITED