Set The Date; Reset Your Phone; Registration - VTech VT1050 User Manual

Set the Date

1. Press and / to select HS SETTINGS.
2. Press and / to select DATE & TIME.
3. Press and / to select SET DATE.
4. Press to enter the date information. The time entered will be in the format follow the DELETE FORMAT
you set before.
5. Press to confirm.

Reset your Phone

You can reset your phone to the default settings. After reset, all you personal settings and call list entries will
be deleted, but your phonebook remains unchanged.
1. Press and / to select DEFAULT.
2. Press and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press to confirm.
5. Press to re-confirm.

Registration

Your handset and base station is pre-registered. Up to six handsets can be registered to a single base station.
If for some reason, the handset is not registered to the base station (
near the base station), register your handset according to the following procedure.
1. Press and hold on the base station for about five seconds, the base station is entered into registration mode.
2. Press and to select REGISTRATION.
/
3. Press and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press to confirm.
If the handset registration is successful, you will hear a confirmation tone and the
The handset will
automatically be allocated the next available handset number. This handset number is
shown in the handset display in standby mode. If the
flashes even when the handset is
will stop flashing.
handset registration is unsuccessful, the will still flash.
• If date has
been set
before, the
current date
will display,
otherwise,
"DD-MM-YY"
will display.
26