Handset Settings; Alarm Settings; Turn On/Off The Alarm; Set The Alarm Time - VTech VT1050 User Manual

Handset Settings

Alarm Settings

You can use this phone to set an alarm clock. When an alarm is set, the
• If ON is alarm time is reached, the
of 45 seconds. You can press any key to disable the alarm. If snooze function is activated, the alarm will sound
selected, you
will be asked again at the end of the snooze period of seven minutes. You can also press and hold
function.
to set the
alarm time .

Turn on/off the Alarm

1. Press and / to select HS settings.
2. Press and / to select Alarm.
3. Press and / to select ON/OFF.
4. Press to confirm.

Set the Alarm Time

1 Press and / to select HS SETTINGS
2 Press and / to select ALARM.
3 Press and / to select ON/OFF.
4 Press to confirm.
5 Enter the alarm time
6 Press to set the snooze function.
7 Press and / to select SNOOZE ON or SNOOZE OFF.
8. Press to confirm.
Note:
a. Key press is still applicable if handset keypad is locked and when the alarm time is reached.
b. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME
OFF, the alarm still sounds at VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when the alarm time is reached, the
will still flash. An alarm tone will be emitted from the earpiece to notify user the alarm time is reached. Once user
press any key or press and hold
d. During paging or ringing, the alarm will not sound when the alarm time is reached. However, if snooze function is
enabled, the alarm will sound again at the end of the snooze period provided that it's not ringing or in paging mode
at the end of the snooze period
21
and "ALARM ON" flash on the LCD ringing with the alarm melody for a duration
to disable the alarm, it will revert to the call duration screen.
.
displays on the LCD. When the
to terminate the snooze
and "ALARM ON"