Power Trim And Tilt Motor (F100C); Checking The Power Trim And Tilt Motor; Assembling The Power Trim And Tilt Motor - Yamaha F100C Service Manual

BRKT
Checking the power trim and tilt
motor
1. Check the commutator for dirt or foreign
substances. Clean with #600 grit sand-
paper if necessary.
2. Check the commutator undercut for dirt
or foreign substances. Clean with com-
pressed air if necessary.
3. Check the armature coil for continuity.
Replace if out of specifications.
Armature coil continuity
Commutator segments a
Segment-laminations b
Segment-shaft c
7-87
Bracket unit
Continuity
No continuity
No continuity
4. Check the circuit breaker for continuity.
Replace if there is no continuity.
5. Check the base for cracks or damage.
Replace if necessary.
6. Check the oil seal 1 for damage or wear.
Replace if necessary.
Assembling the power trim and tilt
motor
1. Install the oil seal 1 into the motor base
2 as shown.
2. Install the springs 3 into the motor base
2, then the brush holder 4 into the
motor base together with the brushes 5
and circuit breaker 6.
S60C7950
A A
S60C7965
60C5D11